Tune-up – The tune-up has been obsolete for decades. On late model vehicles with computerized engine controls, there is nothing to “tune” or manually adjust. Major engine functions such as idle speed, the fuel mixture and spark timing are all controlled electronically by the powertrain control module. In spite of this, many people still call changing their spark plugs and air filter a tune-up, when in fact what they are actually doing is scheduled preventive maintenance. Platinum and iridium spark plugs typically last upwards of 100,000 miles, and air filters can often go several years or 30,000 miles or more depending on driving conditions and dust exposure.
Chassis Lubrication – Some trucks may have grease fittings on the ball joints, tie rod ends and U-joints. The same goes for some heavy-duty aftermarket replacement ball joints, tie rod ends and U-joints. But on most late model cars and light trucks, the original equipment steering, suspension and drivetrain joints are all sealed for life and do not require any lubrication or service.
Engine Flush – An engine flush circulates a cleaning chemical through the engine to remove sludge, varnish and other contaminants. If you have neglected regular oil changes and your engine is full of sludge, this would be a recommended service. However, if you have changed your oil regularly, and your engine shows no signs of abnormal deposit formation, there should be no need to have your engine flushed.
SOURCE: aa1car